User Acceptance Test dan Penerapan Model ADDIE pada Media Pembelajaran Interaktif Pengenalan Profesi

Authors

  • Ari Nurul Alfian Universitas Bina Insani
  • Yoga Rifai Universitas Bina Insani
  • Rita Wahyuni Arifin Universitas Bina Insani
  • Rika Apriani Universitas Bina Insani
  • Indri Ayu Lestari Universitas Bina Insani
  • Dwi Ismiyana Putri Universitas Bina Insani

Keywords:

Addie models, Blackbox testing, Learning media, Professional recognition, User Acceptance Testing

Abstract

Digital technologies such as computers and handheld devices enhance student engagement and motivation and accelerate learning. Vocational introduction subjects are taught using a package book, a minimal tool for explaining the material becomes a reason for introducing interactive learning media for the introduction of various professions in students at Islamic High School Al-Hilal. The learning media development model used is the ADDIE model which includes Analysis, Design, Development, Implementation and Evaluation. The media testing was conducted using Blackbox Testing and User Acceptance Test (UAT). The results of the Blackbox testing were 100% valid and the UAT results were 92% of the applications were highly qualified from the total of 20 respondents. Learning media can help the process of effective learning activities and make it easier for students to understand the introductory material of a variety of professions.

References

M. R. S., “Teknologi Pendidikan Sebagai Jembatan Reformasi Pembelajaran Di Indonesia Lebih Maju,” J. Manaj. Pendidik. Al Hadi, vol. 2, no. 1, p. 53, 2022, doi: 10.31602/jmpd.v2i1.6390.

Julita and P. D. Purnasari, “Pemanfataan Teknologi Sebagai Media Pembelajaran Dalam Pendidikan Era Digital,” J. Educ. Learn. Innov., vol. 2, no. 2, pp. 227–239, 2022, doi: 10.46229/elia.v2i2.460.

S. Watini, “Implementasi Model Pembelajaran Sentra pada TK Labschool STAI Bani Saleh Bekasi,” J. Obs. J. Pendidik. Anak Usia Dini, vol. 4, no. 1, p. 110, 2020, doi: 10.31004/obsesi.v4i1.190.

A. A. H. and A. A. N., “Multimedia Development Life Cycle Dan User Acceptance Test Pada Media Pembelajaran Interaktif Rumus Matematika,” Bina Insa. ICT J., vol. 9, no. 2, pp. 147–161, 2023, doi: https://doi.org/10.51211/biict.v9i2.2223.

A. A. N., P. M. Y., R. R., and W. A. P., “User Acceptance Test Terhadap Aplikasi Augmented Reality Quivervision 3D Sebagai Media Pembelajaran Mewarnai,” J. Informatics, vol. 6, no. 2, p. 197, 2022, doi: 10.51211/itbi.v6i2.1663.

Z. A. Sial, “Addie Model of Instructional Effectiveness?: Analyzing The Impact On Students Learning,” vol. 6, no. 1, pp. 64–72, 2024, doi: 10.52279/jlss.06.01.6472.

I. Fitriyah, I. Wiyokusumo, and I. Priono Leksono, “Pengembangan media pembelajaran Prezi dengan model ADDIE simulasi dan komunikasi digital,” J. Inov. Teknol. Pendidik., vol. 8, no. 1, pp. 84–97, 2021, doi: https://doi.org/10.21831/jitp.v8i1.42221.

S. Rohaeni, “Pengembangan Sistem Pembelajaran Dalam Implementasi Kurikulum 2013 Menggunakan Model Addie Pada Anak Usia Dini,” Instruksional, vol. 1, no. 2, p. 122, 2020, doi: 10.24853/instruksional.1.2.122-130.

H. F. and N. M., “Model Addie (Analysis, Design, Development, Implementation and Evaluation) Dalam Pembelajaran Pendidikan Agama Islam,” Inov. Pendidik. Agama Islam, vol. 1, pp. 28–38, 2021.

Y. Tristiana, . S., and S. Nur’aini, “Using ADDIE Model to develop STORE (Students on Recreation): An Environmental Exploration-Based Learning Strategy in Merdeka Curriculum,” KnE Soc. Sci., vol. 2024, pp. 656–666, 2024, doi: 10.18502/kss.v9i6.15319.

Moses Adeleke Adeoye, Kadek Adrian Surya Indra Wirawan, Made Shania Satya Pradnyani, and Nyoman Intan Septiarini, “Revolutionizing Education: Unleashing the Power of the ADDIE Model for Effective Teaching and Learning,” JPI (Jurnal Pendidik. Indones., vol. 13, no. 1, pp. 202–209, 2024, doi: 10.23887/jpiundiksha.v13i1.68624.

Y. Chin Chin and C. Kah Heng, “Using ADDIE Model to Develop and Evaluate Little Periodic Learning the Periodic Table of Elements,” Malaysian Online J. Educ. Sci., vol. 12, no. 2, pp. 21–34, 2024, [Online]. Available: http://mojes.um.edu.my/.

A. D. R., E. H., and H. A. N., “Pengembangan modul pembelajaran fuzzy pada mata kuliah Sistem Cerdas untuk mahasiswa S1 Pendidikan Teknik Elektro Universitas Negeri Malang,” Tekno, vol. 29, no. 1, p. 26, 2020, doi: 10.17977/um034v29i1p26-40.

C. M. A., S. A., and L. A., “Analisa User Acceptance Testing Terhadap Sistem Informasi Pengelolaan Bedah Rumah di Dinas Perumahan Rakyat dan Kawasan Permukiman Kabupaten Jepara,” Indones. J. Technol. Informatics Sci., vol. 3, no. 1, pp. 36–41, 2021, doi: 10.24176/ijtis.v3i1.7531.

R. R. and S. A., “Pengembangan Bahan Ajar Modul Berbasis Pendekatan Kontekstual Berbantuan Aplikasi Canva Materi Pecahan Untuk Meningkatkan Hasil Belajar Siswa Kelas III Sekolah Dasar,” J. Profesi Pendidik., vol. 1, no. 2, pp. 133–141, 2022, doi: 10.22460/jpp.v1i2.11757.

Downloads

Published

2024-10-26

How to Cite

Ari Nurul Alfian, Yoga Rifai, Rita Wahyuni Arifin, Rika Apriani, Indri Ayu Lestari, & Dwi Ismiyana Putri. (2024). User Acceptance Test dan Penerapan Model ADDIE pada Media Pembelajaran Interaktif Pengenalan Profesi. Prosiding SISFOTEK, 8(1), 265 - 271. Retrieved from https://seminar.iaii.or.id/index.php/SISFOTEK/article/view/500

Issue

Section

Sistem Informasi dan Teknologi

Similar Articles

You may also start an advanced similarity search for this article.

bk8